Contact us
15015488307
V6000 high speed injection dispensing valve
Brief description：The maximum frequency of Y & d6000 series can reach 250Hz. In dispensing operation spray glue is applied to the workpiece surface to avoid z-axis movement in traditional dispensing; The consistency accuracy of spraying glue points can reach more ...
Update time：2021-09-10 11:07- Visits：
Product introduction:
The maximum frequency of Y&D6000 series can reach 250Hz. In dispensing operation, spray glue is applied to the workpiece surface to avoid z-axis movement in traditional dispensing; The consistency accuracy of spraying glue points can reach more than 98%, and the minimum spraying amount is 0.002ul. It can match any dispensing platform, dispensing manipulator and overall machine in the market. It may spray into narrow gaps, and it can fly dispensing on the upper surface of uneven workpieces.
Features and advantages:
a. It is suitable for spraying a variety of fluids. It can be used in UV, epoxy, encapsulation adhesive, thermal conductive adhesive, grease, silicone oil and so on
b. The minimum dispensing point diameter is 0.3mm
c. Fast, dispensing frequency up to 200Hz
d. Flexibility, can match any dispensing platform in the market
e. Easy disassembly and maintenance
Spray dispensing performance:
The special nozzle can spray in the gap as small as 0.15mm
Minimum line width 0.35mm
Minimum glue spot diameter 0.3mm
Maximum frequency 200Hz
Minimum pause time: 2ms
Minimum opening time: 3MS
The injection quantity can be accurate to 0.0001ul
The non-contact working principle greatly avoids the interference and collision between the nozzle and the workpiece, and has high consistency
Heating module can be added to control fluid accuracy, simple modular design and easy integration
Applicable ambient temperature: 0 ~ 45 ℃
Maximum allowable diameter of particles in adhesive: 20un
Cleanliness of compressed air: air dust particles less than 0.3um
Structural parameters of injection dispensing valve:
Glue:
Suitable for fluid types, adhesives, lubricants, water solvents, liquid polymers, inks, silicone oils, etc.
Injection valve controller
The maximum frequency of Y&D6000 series can reach 250Hz. In dispensing operation, spray glue is applied to the workpiece surface to avoid z-axis movement in traditional dispensing; The consistency accuracy of spraying glue points can reach more than 98%, and the minimum spraying amount is 0.002ul. It can match any dispensing platform, dispensing manipulator and overall machine in the market. It may spray into narrow gaps, and it can fly dispensing on the upper surface of uneven workpieces.
Features and advantages:
a. It is suitable for spraying a variety of fluids. It can be used in UV, epoxy, encapsulation adhesive, thermal conductive adhesive, grease, silicone oil and so on
b. The minimum dispensing point diameter is 0.3mm
c. Fast, dispensing frequency up to 200Hz
d. Flexibility, can match any dispensing platform in the market
e. Easy disassembly and maintenance
Spray dispensing performance:
The special nozzle can spray in the gap as small as 0.15mm
Minimum line width 0.35mm
Minimum glue spot diameter 0.3mm
Maximum frequency 200Hz
Minimum pause time: 2ms
Minimum opening time: 3MS
The injection quantity can be accurate to 0.0001ul
The non-contact working principle greatly avoids the interference and collision between the nozzle and the workpiece, and has high consistency
Heating module can be added to control fluid accuracy, simple modular design and easy integration
Applicable ambient temperature: 0 ~ 45 ℃
Maximum allowable diameter of particles in adhesive: 20un
Cleanliness of compressed air: air dust particles less than 0.3um
Structural parameters of injection dispensing valve:
| Overall dimension | W 24mm*D 90mm *H 160mm |
| weight | 500g |
| Contact adhesive material | SUS904 |
| Glue inlet | International Ruhr interface |
| Striker assembly | Super cemented carbide |
| Integral nozzle assembly | Super cemented carbide |
| Heating temperature range | Room temperature - 75 ℃ |
| Heating rod power | 100W |
| Fluid seal ring | Peek/PE/PIFE |
| Other O-rings | EPDM PTFE |
| Valve body sealing ring | HNBR |
| Striker piston | synthesis PIFE |
| Drive solenoid valve | FESTO |
Glue:
Suitable for fluid types, adhesives, lubricants, water solvents, liquid polymers, inks, silicone oils, etc.
Injection valve controller
Last：period
Contact us
- Mailbox：sales@yddispenser.com
- Address：No. 25, Daxin Road, Hedi community, Nancheng District, Dongguan
Sweep and pay attention to us
Copyright © 2020-2022 Dongguan Yiren Industrial Co., Ltd Copyright Record No：Yue ICP Bei No. 06104642
