Welcome to Y&D Technology(H.k)Co.,Ltd

leaveword|Faq|Contact us|Site map

Y&D Technology (H.K) CO.,LTD14 years profssional dispensing equipment scheme and process best supplier

Email: info@dispensing.cc

TEL: +86-769-85705386

Popular searches:

Thanks for the following customers
Current location: HomeNews Center » The information of Y&D » FAQ » What is the dispenser?

Recommended Products

JET 6000 Jet Valve
JET 6000 Jet Valve
JET 6000 Jet Valve is a knid of non-contact Jet dispensing valve which can be high speed & controable capacity dispensing for variety knids of fluids, adhesives, such as underfill glue, sealant, epoxy adhesive, UV glue, conductive adhesive, silver glue, red glue, surface-mount adhesive, coating glue, Ink, siliconeoil, Enzyme, etc. It not only can jetting in the narrow space of 100nm, but also can do 0.01mg precision jetting in specified.
Y&D860 Temperature Control Dispenser
Y&D860 Temperature Control Dispenser
Y&D860 Temperature Control Dispenser Microprocessor-based control; Dispensing time: 0.001~99.99s +/-0.1% Repetitive Accuracy: 0.05% Adjustable fluid pressure: 0~120Psi; With dual zone heating function which can adjust the temperature alone; 2 years function warranty
Y&D7000F Automatic Dispensing Robots
Y&D7000F Automatic Dispensing Robots
Y&D7000F Automatic Dispensing Robot arm is a kind of intellighent device, with optical fiber sensing to position automatically, the needle can correct coordinates after change it. Without manual adjustment, to ensure the repeat dispening accuracy.
Y&D5000 Series DIY Dispensing Robots
Y&D5000 Series DIY Dispensing Robots
Y&D5000 Series DIY Dispensing Robot is a new design 3 axis automatic dispenser of Y&D Technoligy(H.K)Co.,Ltd. It is suitable for varied operating mode, it is quite easy to control and budget.
Y&D7500N Full Automatic Dispensing Robot
Y&D7500N Full Automatic Dispensing Robot
Y&D7500N full automatic dispensing machine is newly designed machine which is the biggest model of the Y&D7000N series. With the optimization of size and powerful function, the Z Axis can be make bigger as 150mm. It is especially suitable for large not connected or large dispensing equipment operation. Also this machine is applied to the plasma treatment before dispensing. With teach pendant and leading programming software, users can make programs step by step in a few mi
One-piece Precision nozzles
One-piece Precision nozzles
For high-precision dispensing of materials containing fillers. This nozzle is suitable for high-precision dispensing of small amounts of materials containing fillers,without clogging.
Y&D 500D Precision Valve
Y&D 500D Precision Valve
The valve can controll with all the liquid to dispensing. The YD500D precision liquid valve have filler for containing fluid.
Y&D860C Thermostat
Y&D860C Thermostat
Y&D860C Thermostat With dual zone heating function temperature of barrel & trip can be adjust 2 years function warranty weight: 2kg

Top articles

Latest articles

Your browsing history

    Loading...

What is the dispenser?

Categories: FAQStars: 3Stars Visit: - Release time: 2015-06-10 09:45:00
RSS subscription Font size:【 Large Middle Small

Dispenser is above the need to patch the PCB board positions in advance a special glue point to fixed-chip components, curing and then after wave soldering. Dispensing is based on the program automatically.

Dispenser is a newly designed machine which make programs by the teach pendant.
It is quite easy to operate that one can learnt to operate in few minutes.
With CE Card in it, one machine can store at least 100 groups of programs, 4000 points in each group.
This kind of machine can be made 3 axis or 4 axis according to customers' requirements.
Dispensers can be full automatic or semi-automatic, the application in filling, adhesive, moulding and sealing
which need to inject adhesive and sealant.
With multi-axis system which can simple programming for points, stripes, arcs, composite curve, and different patterns.
The machine can set up quickly and easy to operate, can save time for other projects so that help to increase production efficiency.
Application to: Filling, Dotting, Forming, Drawing, Underfilling, Coating, Dosing, Doming, Spraying, Bonding, etc.
Apply to: Adhesive, Coating materials, Acrylic resin adhesive, Grease, Oil paint, Reagent, Sealant, Solder paste solvents, etc.