Welcome to Y&D Technology(H.k)Co.,Ltd

leaveword|Faq|Contact us|Site map

Y&D Technology (H.K) CO.,LTD14 years profssional dispensing equipment scheme and process best supplier

Email: info@dispensing.cc

TEL: +86-769-85705386

Popular searches:

Thanks for the following customers
Current location: HomeNews Center » The information of Y&D » Technical support » The selection principles and basic characteristics of the glue

Recommended Products

TS-5400 Series Needle Valve
TS-5400 Series Needle Valve
TS-5400 Series Needle Valve This kind of valve can very sophisticate to point multiple sizes of glue. An external stoke control allows the operateor to fine-tune fluid flow easily. Compact design and easy installation threaded hole can be easily integrated into the automation applications.
Y&D860A Glue Preheating Thermostat
Y&D860A Glue Preheating Thermostat
Y&D860A Glue Preheating Thermostat With the function to preheating glue Temperature control circuit; PID Control temperature Sensor; Platinum resistance to measure temperature
V-605 Rotary Valve
V-605 Rotary Valve
V-605 Rotary Valve is a kind of valve suitable for mid/high viscosity fluids dispensing. 90°rotation angle designed to interrupt glue, guide rod and guide sleeve coordination, using special ceramic precision machining. In good sealing that has advantages in deal with fluid containing hard particles.
Barrel cover and barrel cap
Barrel cover and barrel cap
Barrel cover:1t is used to close the top of the barrel when you fill it with liquids in advance or store liquids after using.
Barrel cap: It is used to close the bottom of all kinds of barrels.
V-781 Spray Valve
V-781 Spray Valve
It is perfectly spray for mid/low viscosity fluid using. Low pressure & fluid technical to make sure good uniformity.
V-741 Trace Firing Pin Valve
V-741 Trace Firing Pin Valve
Main used in the occasions of dispensing axis in lower load bearing, limited matching space or multi-valves application,etc.Small in size and light in weight. Flow is larger then general firing pin valve. Not easily afftected by air bubbles. Clean in interrupt glue. Simple in maintenance.
Y&D7000S Series Dispensing Robot
Y&D7000S Series Dispensing Robot
Y&D7000S Series Dispensing Robots collocate with Panasonic servo motor and precision ball screw, it is quite stable & durable. Also, in this way, this kind of machine will be more precision then normal 3 axis dispensing robot. It is a very popular model which can operateed by the teach pendant. With the interpolation function, all axis can dispensing straight lines or arc. On the other hand, with the powerful software, it is quite convenient to use, easy to learn and operate
Y&D5000 Series DIY Dispensing Robots
Y&D5000 Series DIY Dispensing Robots
Y&D5000 Series DIY Dispensing Robot is a new design 3 axis automatic dispenser of Y&D Technoligy(H.K)Co.,Ltd. It is suitable for varied operating mode, it is quite easy to control and budget.

Top articles

Latest articles

Your browsing history

    Loading...

The selection principles and basic characteristics of the glue

Categories: Technical supportStars: 3Stars Visit: - Release time: 2015-06-12 10:51:00
RSS subscription Font size:【 Large Middle Small

The choice of dispensing machine principle:

1, glue: ordinary glue point with one-component adhesive machine, AB glue using double liquid dispensing machine, PU adhesive using PU adhesive glue machine, UV glue using specific cylinder dispensing,and so on.Both they can use Y&D7000N Series dispensing machine ,only use the difference accessories.

2, dispensing process: ordinary glue used semi-automatic point glue machine (such as a foot control), accurate positioning line selection table, three axis, such as a circle with the function of automatic dispensing machine. Dispensing machine automation function actually belongs to the auxiliary function, more have the effect of control glue, glue the other functions can be realized with the help of automation manipulator.

3, Work efficiency: depending on the size of the product and the glue process. The conclusion is based on the specific test of the product.

4, cost: dispensing solution varied, not all of the points you need to use the machine, also not all automatic dispensing machine must be attached to point glue machine. From cost to consider, if some glue need machines with high price, can consider to change the glue. If with automatic dispensing machine price is too high, can consider to move products instead of dispensing head.

Use glue dispensing machine basic features:


A) what is the glue? One-component is a two-component (AB glue)

B) if it's a two-component, AB glue volume than what is

C) glue viscosity and density?

D) about how long time to start curing glue? Completely cure time?

E) how glue packaging