Welcome to Y&D Technology(H.k)Co.,Ltd

leaveword|Faq|Contact us|Site map

Y&D Technology (H.K) CO.,LTD14 years profssional dispensing equipment scheme and process best supplier

Email: info@dispensing.cc

TEL: +86-769-85705386

Popular searches:

Thanks for the following customers
Current location: HomeNews Center » The information of Y&D » Y&D company dynamic » The more thick, the glue not adhere to it

Recommended Products

TS-5500 Series Spray Valve
TS-5500 Series Spray Valve
TS-5500 Series Spray Valve The design of new TS5540-MS aims to dispensing mid/low viscosity fluids through one-off dispensing tip. This innovative desigh make the valve spray uniformly and consistently in the diamater range of 4.6mm-16mm. TS5540-MS wuth field-replaceable Polyoxymethylene resin which can achieve effective closure and extend its working life.
Y&D1800II Digital dispenser
Y&D1800II Digital dispenser
Dispenses all assembly fluids; With manual(dispensing in continuous)and auto(dispensing inparts)functions; Using vacuum adjustment mechanism to prevent drip leakage; With the function of input & output signals;
Y&D 1100 Digital Dispenser
Y&D 1100 Digital Dispenser
The picture of Y&D 1100 is our standard machine. It can match with other Y&D accessories such as valve, tank, cartridge and so on. We can recommend our machine to you according to your request.It is Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip.
Y&D800 Peristaltic dispenser
Y&D800 Peristaltic dispenser
Size: 190W×184D×94H
Weight: 3.5kg
Voltage: 110/220VAC,50/60Hz
Speed: 0~160RPM
Time/ gelatinize Rolling:O~999°
Rolling/Back Rolling:l~ 999°。
Min Dot: 0.0001 cc(Φ0.2* Φ0.7 0peration)
Y&D860C Thermostat
Y&D860C Thermostat
Y&D860C Thermostat With dual zone heating function temperature of barrel & trip can be adjust 2 years function warranty weight: 2kg
One-piece Precision nozzles
One-piece Precision nozzles
For high-precision dispensing of materials containing fillers. This nozzle is suitable for high-precision dispensing of small amounts of materials containing fillers,without clogging.
Y&D5000 Series DIY Dispensing Robots
Y&D5000 Series DIY Dispensing Robots
Y&D5000 Series DIY Dispensing Robot is a new design 3 axis automatic dispenser of Y&D Technoligy(H.K)Co.,Ltd. It is suitable for varied operating mode, it is quite easy to control and budget.
Y&D 7000V Series Automatic Vision Positioning Dispensing Robots
Y&D 7000V Series Automatic Vision Positioning Dispensing Robots
Y&D 7000V Series Automatic Vision Positioning Dispensing Robots which equipped with high performance CCD vision positioning system, visual dispensing route that can improve accuracy; According to different artifacts, choose suitable LED light source for lighting;

Top articles

Latest articles

Your browsing history

    Loading...

The more thick, the glue not adhere to it

Categories: Y&D company dynamicStars: 3Stars Visit: - Release time: 2015-06-12 10:27:00
RSS subscription Font size:【 Large Middle Small

Bonding of the object, is to rely on tensile strength of the polymer volume of glue. Polymer body slowly permeated the objects within the organization. After disappear when solvent in glue, glue the polymer body will depend on each other, the tension between the two objects tightly together. In the use of glue, the glue quantity too much will make the polymer body crowded together in glue; Between polymer produced no good pull. Glue glue polymer body crowded each other, thus forming the strongest appeal to each other. At the same time, between polymer solvent is not easy to volatilize. This is why in the process of bonding "film is thicker, the glue adhesive effect is the cause of the worse". Glue quantity is too much, big glue is filling effect rather than the adhesive effect, of an object not by glue adhesive bond, but the cohesion of glue.