Welcome to Y&D Technology(H.k)Co.,Ltd

leaveword|Faq|Contact us|Site map

Y&D Technology (H.K) CO.,LTD14 years profssional dispensing equipment scheme and process best supplier

Email: info@dispensing.cc

TEL: +86-769-85705386

Popular searches:

Thanks for the following customers
Current location: HomeNews Center » The information of Y&D » Technical support » Glue filling design process matters needing attention

Recommended Products

Barrel cover and barrel cap
Barrel cover and barrel cap
Barrel cover:1t is used to close the top of the barrel when you fill it with liquids in advance or store liquids after using.
Barrel cap: It is used to close the bottom of all kinds of barrels.
Clear barrels
Clear barrels
Clear syringes are for normal fluids, amber for UV-cure fluids (blocks UV wavelengths from 240-550nm) and opaque black are for light-sensitive fluids. Each box contains an equal number of syringes and white PE pistons.
TS-5000 Series Screw Valve
TS-5000 Series Screw Valve
TS-5000 Series Screw Valve Using rotary feed screw through activities replaced by positive displacement to dispensing that can ultra-precision control of the dispensing process. Special design ensure there alwarys have dispensing materials in the scrw entrance. Screw rotate when being controlled and then move materials from the entrance to the exit. The forward and reverse rotate control function that controlled the quantity of the output materials.
V-740 Large Flow Firig Pin Valve
V-740 Large Flow Firig Pin Valve
It's main used in the occasions of dispensing axis in lower load bearing, limited matching apace or multi-valves application,etc.
Y&D 660D Bilateral Precision Valve
Y&D 660D Bilateral Precision Valve
Two-component valve is suitable for a two component fluid in sealing, draw dot, line, etc. Features Double pneumatic control. Pressure balance valve core design. Recycled suction make it without liquid dripping. Suitable Fluid Epoxy resin / Sealant / Silica gel
Y&D Grantry Conveyor Dispensing Robots
Y&D Grantry Conveyor Dispensing Robots
Y&D9000 series Gantry Conveyor Robots with auxiliary designing to ensure the stability of large stroke, solid aluminum structure with anti-shock performance, suitable for industrial.
Y&D860 Temperature Control Dispenser
Y&D860 Temperature Control Dispenser
Y&D860 Temperature Control Dispenser Microprocessor-based control; Dispensing time: 0.001~99.99s +/-0.1% Repetitive Accuracy: 0.05% Adjustable fluid pressure: 0~120Psi; With dual zone heating function which can adjust the temperature alone; 2 years function warranty
Y&D 1100 Digital Dispenser
Y&D 1100 Digital Dispenser
The picture of Y&D 1100 is our standard machine. It can match with other Y&D accessories such as valve, tank, cartridge and so on. We can recommend our machine to you according to your request.It is Suitable for all types of fluids, includes a suck-back feature to ensure low viscosity liquids do not drip.

Top articles

Latest articles

Your browsing history

    Loading...

Glue filling design process matters needing attention

Categories: Technical supportStars: 5Stars Visit: - Release time: 2015-06-12 09:57:00
RSS subscription Font size:【 Large Middle Small

Filling glue dispensing machine design process considerations (yi da) dongguan yi da point glue factory, glue filling the effective use of requirements with many factors, including product design, to meet the need of rubber filling process and products. With the density increase of circuit and the elimination of product form factor, the electronics industry has appeared many new methods, to the design of the chip level more closely with the board level (assembling together. To some extent, such as the emergence of flip chip and chip level packaging technology has in fact blurs the semiconductor chip, chip level packaging method and the printed circuit board assembly process of the traditional boundaries between. Although the advantages of these new high-density chip level assembly technology is very important, but with smaller size makes the components, connections, and packaging to the physical and temperature stress is more sensitive to choose the best technical dispensing and achieve continuous and reliable production effect is becoming more and more difficult.